Today’s call in hardwood flooring fashion and design is for a more rustic, delicate scraped, softly distressed and multi width alternative. The French Quarter has answered with a stunning collection in an American Hickory and Birch that ensures to compliment your home in both new and earlier aspirations.
The mixed 3″, 5″ & 7″ width visual complimented with a softy textured surface will add warmth and elegance to any room.
Finished with nine coats of UV Cured Urethane and two coats of Aluminum Oxide. This ensures maximum protection without sacrificing the natural beauty of the wood.
In a traditional solid hardwood floor, most of the premium wood is wasted below the wear layer. Coastal Shores uses premium hardwood only for the wear layer, conserving our hardwood forests.
Installation method: Nail, Staple, Glue, or Float as to NWFA standard. All Dansk Hardwood flooring requires a stable environment where humidity levels must be maintained between 30% and 50% R.H.
Indoor Air Quality
Meets E0 standard with no added formaldehyde.
Engineered, Plywood Core
Hickory & Birch
3 in. (76mm), 5 in. (127mm), 7 in. (178mm)
3/8 in. (9.25mm)
.06 in (1.5mm)
Random Lengths 24 in. (600mm) to 72 in. (1,830mm)
9 coats UV Cured Urethane with 2 coats aluminum oxide
25 Year Limited Wear & Lifetime Limited Structural Integrity Warranty
Float, Glue or Staple on, above or below grade. Approved over Hydronic radiant heat systems within compliance of the NWFA guidelines (Birch only)
Hickory: Decatur, Woldenberg & St.Pierre
Birch: Sonesta & Faubourg
- For Installation Instructions, please see our Installation Guides.
- For Moulding Profiles compatible with this collection, see our Moulding Profiles.
- For Maintenance and Care on Jasper Urethane Finishes and UV Oil, see Maintenance and Care of your floor
- For Maintenance and care on Jasper Hard Wax Oil – Smokey Ash, see this pdf
The patterns and colour variations created in a living tree are, like all of nature, never repeated. Remember that your newly installed floor will vary from samples or pictures in brochures. One cannot expect uniformity from hardwood. Accept instead, all of a hardwoods beautiful natural variations.
This product is manufactured in accordance with industry standards, which permit a defect tolerance not to exceed 5%. The defects may be of any type, whether manufactured or natural.